
Conservatory Roof Options for Peterborough Homes
Tiles, glass or new sheets? Each one fixes a different problem. Here is how they compare, what your frame has to cope with, and which suits a brick semi in the suburbs or a stone house out in the villages.
Most people come to this page sure they want a solid roof. Quite often that is right. But if the room is mainly a sun room for spring and autumn, or the frame is old and light, glass or fresh sheets can be the better buy. The question to start with is simple: what annoys you most about the room as it is?
- Roasting by midsummer and icy by December: a tiled warm roof tackles both ends.
- Gloomy, grubby or leaking, but the temperature is bearable: new glass units may be enough.
- Old sheets gone yellow or brittle on a sound frame: new polycarbonate is the quick fix.
Below, each type with the good and the less good spelled out.
Solid tiled warm roof
Insulation and lightweight tiles on top, plasterboard and skim underneath. The glass room stops behaving like a greenhouse and starts behaving like part of the house.
In its favour
- Keeps winter heat in much better than panes or sheets, so January stops being off limits.
- Takes the edge off summer heat, because the sun is no longer pouring straight through the roof.
- Rain on tiles is quiet. Rain on polycarbonate is not.
- Inside it looks like a proper ceiling, with room for spotlights.
Against it
- Noticeably darker, short of a lantern or some glazed panels in the slope.
- The heaviest of the three, so the frame and base must be up to it.
- Normally needs building regulations approval, which adds time and a council charge.
- Costs the most by a wide margin.
Glass roof units
Modern sealed units overhead, usually coated to tame glare and reflect part of the sun’s heat. It still looks like a conservatory, it just behaves better.
In its favour
- Keeps all the daylight and the view of the sky.
- Modern coated glass is a big step up from old units or sheets.
- Usually stays within the conservatory exemption, so less paperwork.
- Much cheaper than going solid.
Against it
- Runs hotter in July and colder in January than tiles ever will.
- Heavier than polycarbonate, so an old lightweight frame may need checking.
- Needs cleaning to keep the light it was bought for.
Polycarbonate sheets
Fresh multiwall sheets fitted into the existing roof bars. The quick, light, lower-cost route when the frame is fine and the old sheets have simply had their day.
In its favour
- The lowest price of the three and usually the fastest job.
- Very light, so it rarely asks anything new of the frame.
- Clears up the yellowing, leaks and grime of tired old sheets.
Against it
- Loud in heavy rain and hail.
- The weakest of the three at keeping heat in or out.
- Lets in diffuse light only; you lose the clear view upwards.
- Sheets fade and discolour over the years.
Will the frame carry the extra weight?
Answer this before anything else, because it settles whether tiles are even on the table. The frame was designed around panes or plastic sheets; tiles, insulation boards and plasterboard together are a much bigger load. If the frame or the base cannot carry that, the new roof will show it in cracks and sticking doors.
A good fitter will look at three things before quoting:
- The side frames: whether the uPVC or aluminium sections can carry the load, or need reinforcing posts.
- The dwarf walls and base: any cracking or movement suggests the foundations need a closer look.
- Doors and window openings: wide openings need support above them once the roof is heavier.
Building control looks at the same points, which is one reason the Building Regulations get involved with solid roofs. The rules in Peterborough are set out on their own page.
Light, heat and noise in plain terms
Glass lets in the most light and, with a modern coating, keeps a good share of the summer heat out, but it is still glass. Polycarbonate gives a softer, milky light and does the least to keep heat in or out. A tiled roof does the most for warmth and quiet and the least for light.
Lifespan depends far more on the quality of the fitting than the label. In general, tiles and glass outlast polycarbonate, which tends to fade and discolour first.
Which roof for which Peterborough home
The district runs from brick suburbs around the city to stone villages in the west, and that changes what looks right behind the house.
Brick suburbs
Against brick, tiles that pick up the colour of the house roof usually look settled. Got a south-facing conservatory nobody can sit in by June? That is exactly the room a solid roof was made for.
Stone villages to the west
Barnack, Castor and Longthorpe have stone buildings that look very different from city brick. Tile colour and style matter more here, and glass can be the gentler choice against old stone.
Conservation areas
Peterborough has 29 of them. A roof that changes how the house looks from outside may need a word with the council first, so glass or a like-for-like swap is often the simpler path.
Not sure which way to go? A firm that has seen the conservatory will give you a much better answer than any chart. Price each option first
Let a local firm match the roof to your house
Your postcode tells us which part of Peterborough or the villages you are in. The other three boxes are so the firm can ring or email you once you say yes.
You tell us where the conservatory is, we find one roof firm that covers that area, and we give you their name before a single detail of yours reaches them. You pay us nothing for this. How your request is handled
Thanks, that has reached us.
Next we search for a roof firm whose patch takes in your postcode, then message you with its name.
Until you have heard that name and said yes, your number and email sit with us and nobody else. We will not add you to any mailing list.